Create a Custom iBOLT Mounting Solution- now on Amazon.com

Suction Cup Base

This “Sticky-Suction” Cup base is made out of heavy-duty composite material and is compatible with all industry-standard 1 inch / 25 mm mounting arms.

Ball joints are coated in a rubber material and the suction base is 80mm in diameter and is completely reusable. Simply rinse the suction cup base with water and let air dry to make it reusable.

Ideal for flat surfaces windshields, dashboards, mirrors, tables, etc.

Create a custom mounting solution with this base on Amazon: here

Cup Holder Base

The cup holder mount is made out of heavy-duty composite plastic material with a rubber-coated 1 inch / 25mm ball joint.

The cup holder mount expands to fit almost any cup holder from 2.5" to 3.5" in diameter.

This strong and sturdy cup holder mount is perfect for cars, trucks, vans, commercial vehicles, or anywhere there is a cup holder.

Create a custom mounting solution with this base on Amazon: here

Seat rail Base

The FlexPro is a heavy-duty floor pedestal mounting solution that is compatible with 1 inch / 25 mm / B Size Dual Ball arms and adapters.

It is designed to install directly on the passenger seat's front left mounting screws.

The strong but flexible gooseneck mount is ideal for industrial and work vehicles/trucks.

Includes 2 mounting brackets for either seat rail or drill-base mounting options and is 18” long.

Create a custom mounting solution with this base on Amazon: here

AMPS Pattern Drill Base

Composite Rectangular AMPS Plate is made out of sturdy composite Plastic material with a rubber-coated ball joint and is compatible with all industry-standard 1 inch / 25 mm mounting arms.

Features a 30x38 mm industry-standard 4 hole pattern (=AMPS) that will work with all industry-standard AMPS adapter plates and vehicle-specific mounts.

Create a custom mounting solution with this base on Amazon: here

AMPS Pattern Drill Base

Metal Rectangular AMPS Plate is made out of sturdy Aluminum with a rubber-coated ball joint and is compatible with all industry-standard 1 inch / 25 mm mounting arms.

Features a 30x38 mm industry-standard 4 hole pattern (=AMPS) that will work with all industry-standard AMPS adapter plates and vehicle-specific mounts.

Create a custom mounting solution with this base on Amazon: here

AMPS Pattern Drill Base

The Round AMPS Plate is made out of sturdy Aluminum with a rubber-coated ball joint and is compatible with all industry-standard 1 inch / 25 mm mounting arms.

Features a 30x38 mm industry-standard 4 hole pattern (=AMPS) that will work with all industry-standard AMPS adapter plates and vehicle-specific mounts.

The circular design is a great alternative for locations where a square or rectangular adapter won’t work.

Create a custom mounting solution with this base on Amazon: here

Seat Wedge Base

Vehicle Wedge mount fits in the space between the front seat and console and adjusts to fit the width of that space.

This mount is made out of sturdy composite plastic material and is great for front seat and back seat center console viewing.

No permanent installation- Easy to remove and place in another vehicle

Create a custom mounting solution with this base on Amazon: here

C-Clamp Base

Install the C-clamp base on a tripod, desk, cart, worktable, bench, lectern, or other table-like surfaces.

This Metal C-Clamp mount adjusts from 0.25" to 1.6" and clamps onto any table-like surface, pole, or post.

Create a custom mounting solution with this base on Amazon: here

Clamp Base

Clamp your device onto exercise equipment such as Peloton bikes, Ellipticals, Treadmills, Spin bikes, golf carts, handlebars, wheelchairs, carts, and more.

This Clamp base is made out of heavy-duty composite material and is compatible with all industry-standard 1 inch / 25 mm mounting arms.

The mount fits on poles, posts, and flat surfaces measuring from 0.25 inches to 2.5 inches in diameter.

Create a custom mounting solution with this base on Amazon: here

Forklift Pillar Base

The iBOLT Forklift pillar mount is great for mounting and securing devices, such as smartphones, tablets, barcode scanners, and radios.

These heavy-duty brackets are made out of heavy gauge steel to last in tough environments.

These brackets are made to mount on forklifts, pallet jacks, or any other warehouse vehicle.

Forklift pillar mount weighs just under half a pound and measures 4” x 2.75” x 1/8”.

Create a custom mounting solution with this base on Amazon: here

2.75” Composite Arm

This double Socket arm is made out of strong composite material and the length of this arm is 2.75 inches measuring from one end of the arm to the other.

Available to purchase separately on Amazon: here

3.75” Composite Arm

This double Socket arm is made out of strong composite material and the length of this arm is 3.75 inches measuring from one end of the arm to the other.

Available to purchase separately on Amazon: here

2.75” Metal Arm

This double Socket arm is made out of strong aluminum material and the length of this arm is 2.75 inches measuring from one end of the arm to the other.

Available to purchase separately on Amazon: here

3.75” Metal Arm

This double Socket arm is made out of strong aluminum material and the length of this arm is 3.75 inches measuring from one end of the arm to the other.

Available to purchase separately on Amazon: here