Most Garmin GPS systems that use ball mounts use an industry-standard 17mm ball size, however, there are a variety of Garmin GPS devices that are also compatible with the industry-standard 4- Hole AMPS pattern, 22mm ball mounts, and the 1 inch ball line. In this article, we will go over the different Garmin GPS devices and the optimal mounting solutions for each.
What Garmin GPS systems use a 17mm ball mount?
Here are some of the most popular Garmin GPS Devices that are compatible with a 17mm ball mount:
- Garmin Drive 52
- Garmin dēzl™ OTR series: OTR500, OTR700
- Garmin Overlander
- Garmin Catalyst™ Driving Performance Optimizer
- Garmin zūmo® XT
Current Models are Available on Garmin.com
Top 5 iBOLT 17mm Ball Garmin GPS Mounts:
The iBOLT 17mm Dual Ball “Sticky” Suction Cup Mount is great for mounting your Garmin GPS system or any other 17mm accessory on flat surfaces, such as windshields or dashboards.
The suction base is 80mm in diameter and is completely reusable. Simply rinse the suction cup base with water and let air dry to make it reusable.
Works with all industry-standard 17mm smartphone holders, 17mm Garmin GPS devices, and 1 inch/ 25mm/ B Size ball mounts and adapters.
The iBOLT 17mm Clamp mount fits on bicycle or motorcycle handlebars measuring 0.25 inches to 2.5 inches in diameter and is easy to install with a twist of a knob. Great for mounting your Garmin on handlebars, poles, golf carts, rails, wheelchairs, etc.
Simply clamp the mount onto your exercise bike, equipment, or cart and tighten the knob for a secure hold.
Works with all industry-standard 17mm smartphone holders, 17mm Garmin GPS devices, and 1 inch/ 25mm/ B Size ball mounts and adapters.
The iBOLT AMPS pattern drill base mount is great for mounting your Garmin GPS permanently on any flat surface.
This mount features an industry-standard AMPS pattern which consists of a 4-Hole pattern spaced 30mm x 38 mm apart. This hole pattern is commonly used for vehicle-specific adapters and mounts and is also compatible with some Garmin GPS systems not using the 17mm ball.
Works with all industry-standard 17mm smartphone holders, 17mm Garmin GPS devices, and 1 inch/ 25mm/ B Size ball mounts and adapters.
This Sturdy Cup Holder mount features our robust 3.75” Bizmount for full 360-degree rotation.
The iBOLT Bizmount console works with different styles of cup holders and expands from 2.5" to 3.5" in diameter. Whether you are in a vehicle or you just want your device in an easy-to-view position for your recliner chair, we have you covered.
Works with all industry-standard 17mm smartphone holders, 17mm Garmin GPS devices, and 1 inch/ 25mm/ B Size ball mounts and adapters.
The iBOLT miniBall mount and Vent mount work with all iBOLT car docks, Garmin devices, and all 17mm smartphone holders.
Both mounts feature an industry-standard 17mm ball joint and offer a lower profile for your docking solution. The miniBall attaches to just about anywhere on your car, and the vent mount goes right over your air vent.
Works with all industry-standard 17mm smartphone holders, 17mm Garmin GPS devices, and 1 inch/ 25mm/ B Size ball mounts and adapters.
What Garmin GPS systems use an AMPS Pattern Screw mount?
iBOLT has many AMPS pattern mounts in different sizes, shapes, and material configurations. The AMPS pattern is a 4-Hole rectangular pattern spaced at 30mm by 38mm. This industry-standard pattern is widely used in the mounting industry for vehicle-specific brackets, attaching devices, and more. iBOLT offers a 2-Hole diamond adapter that matched the 4-hole AMPS pattern diagonally. To view the full line of AMPS pattern mounts check out our collection here.
Here are some of the most popular Garmin GPS Devices that are compatible with a AMPS Pattern mount:
- GPSMAP® 276Cx
- GPSMAP® 66i
- GPSMAP® 66sr
- Montana® 600
- Montana® 610
- Montana® 610t Camo
- Montana® 650t
- Montana® 680
- Montana® 680t
- Tread®
- Tread® - Base Edition
- zūmo® 395LM
- zūmo® 396 LMT-S
- zūmo® 595LM
- zūmo® XT
Current Models are Available on Garmin.com
Top 4 iBOLT AMPS Pattern Garmin Mounts:
- Composite 3.5 inch Bizmount Arm
- Measures 5.75 inches end to end with ball adapters attached
- Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters
- Includes: 3.5 inch Composite 38mm Bizmount Arm, 38mm / 1.5 inch Metal Rectangular AMPS pattern ball mount, 38mm / 1.5 inch Diamond Composite 2-hole AMPS pattern ball mount
- Aluminum 5 inch Bizmount Arm
- Measures 7.25 inches end to end with ball adapters attached
- Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters
- Includes: 5 inch Aluminum 38mm Bizmount Arm, 38mm / 1.5 inch Composite Rectangular AMPS pattern ball mount, 38mm / 1.5 inch Diamond Composite 2-hole AMPS pattern ball mount
- Composite 5.75 inch Bizmount Arm
- Measures 8 inches end to end with ball adapters attached
- Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters
- Includes: 5.75 inch Composite 38mm Bizmount Arm, and (2) 38mm / 1.5 inch Metal Rectangular AMPS pattern ball mounts
- Aluminum 8.5 inch Bizmount Arm
- Measures 8 inches end to end with ball adapters attached
- Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters
- Includes: 8.5 inch Composite 38mm Bizmount Arm, and (2) 38mm / 1.5 inch Metal Rectangular AMPS pattern ball mounts
Top 4 Mounts for the Garmin Stricker 4:
The mounts feature a round mounting plate with a 3-hole triangular pattern that is compatible with the Garmin Stricker 4 Fishfinder devices.
- Composite 3.5 inch Bizmount Arm
- Measures 5.75 inches end to end with ball adapters attached
- Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters
- Includes: 3.5 inch Composite 38mm Bizmount Arm, 38mm / 1.5 inch Metal Circular AMPS pattern ball mount, 38mm / 1.5 inch Diamond Composite 2-hole AMPS pattern ball mount.
- Aluminum 5 inch Bizmount Arm
- Measures 7.25 inches end to end with ball adapters attached
Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters - Includes: 5 inch Aluminum 38mm Bizmount Arm, 38mm / 1.5 inch Metal Circular AMPS pattern ball mount, 38mm / 1.5 inch Diamond Composite 2-hole AMPS pattern ball mount.
- Composite 5.75 inch Bizmount Arm
- Measures 8 inches end to end with ball adapters attached
- Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters
- Includes: 5.75 inch Composite 38mm Bizmount Arm, 38mm / 1.5 inch Metal Circular AMPS pattern ball mount, 38mm / 1.5 inch Diamond Composite 2-hole AMPS pattern ball mount.
- Aluminum 8.5 inch Bizmount Arm
- Measures 10.5 inches end to end with ball adapters attached
- Compatible with industry standard 1.5-inch / 38 mm / C size mounts and adapters
- Includes: 8.5-inch Aluminum 38mm Bizmount Arm, 38mm / 1.5 inch Metal Circular AMPS pattern ball mount, 38mm / 1.5 inch Diamond Composite 2-hole AMPS pattern ball mount.
Top 3 Mounts for the Garmin RV series: RV 1090, RV890, and Garmin dēzl™ OTR series: OTR800, OTR1000:
The mounts feature a 22mm Ball joint that is compatible with the Garmin RV series: RV 1090, RV890, and Garmin dēzl™ OTR series: OTR800, OTR1000:
- The iBOLT 22mm Clamp for Handlebars Poles and posts is great for mounting 22mm holders and adapters.
- INCLUDES- This kit includes an industry-standard 22mm Clamp mount
- SPECS: The mount fits on bicycle or motorcycle handlebars measuring 12mm to 40mm in diameter and is easy to install with a twist of a knob. Great for mounting on tripod legs, handlebars, poles, golf carts, rails, wheelchairs, etc.
- iBOLT miniBall mount will work with all iBOLT and industry-standard 22mm ball adapters and mounts, This adhesive ball joint is perfect as a lower profile for your docking solution. The miniBall attaches to just about anywhere on your car on any flat surface.
-
Features a 22mm Ball joint
Use as an alternative to suction cup mounts -
The miniBall is Mounted with Strong VHB double-sided tape
Includes: 22mm VHB Adhesive Ball Mount
- This iBOLT 20mm AMPS Plate is made out of sturdy composite material and is compatible with all industry-standard 20mm mounting arms.
- FEATURES: a 30mmx38 mm industry-standard 4 hole pattern (=AMPS) that will work with all industry-standard AMPS adapter plates and vehicle-specific mounts.
- INCLUDES: 20mm Composite AMPS adapter plate (No screws or mounting hardware included)
No matter what Garmin device you have, iBOLT has a mount for that! Check out our full line of Garmin compatible mounts here: 17mm Mounts, 22mm Mounts, AMPS pattern Mounts, and Garmin Stricker 4 compatible mounts.
Leave a comment
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.