The modern restaurant runs on tablets. Between Toast POS terminals at the front counter, delivery order management tablets for DoorDash, UberEats, and Grubhub, and kitchen display screens in the back of house, a single location can easily require four or more mounted devices operating simultaneously. iBOLT makes restaurant tablet mounts designed to keep each screen secure, reachable and where staff need it.
TL;DR: iBOLT makes tablet mounts for restaurants that run Toast POS and delivery apps. The Quad Tablet Tower Stand holds up to four tablets in one footprint, the LockPro Drill Base POS Mount adds a locking holder for one counter tablet, and the Dual POS Stand gives cashier and customer each a locking phone holder. Measure each device in its case against the holder before ordering.
Why do multi-tablet restaurants need purpose-built tablet mounting?
Restaurants running Toast POS alongside DoorDash, UberEats, and Grubhub tablets need a dedicated place for every screen. Taped or propped-up tablets create clutter, slow service, and risk hardware damage. iBOLT's heavy-duty restaurant mounts give each screen a fixed home.
Third-party delivery platforms have changed how restaurants operate. A busy location running Toast POS for in-house orders alongside three delivery tablets has to decide where every screen goes before the rush starts.
iBOLT's restaurant mounts give each of those screens a dedicated holder. The Quad Tower and Dual POS listings publish holder limits, and iBOLT can confirm the LockPro opening, so each device can be checked before ordering.
How does the iBOLT Quad Tablet Tower fit four screens in one footprint?
The iBOLT Quad Tablet Tower Stand (from $149.95) holds four tablets in one location, so Toast POS, DoorDash, UberEats and Grubhub can each have a dedicated screen. The listing describes heavy-duty construction and a design that makes good use of floor space.
The tower is built for repeated daily use and comes in two holder variants, TabDock (IBRT-34711) and TabDock XL (IBRT-34711-XL). Choose the variant by measuring each tablet in its case.
How do you secure a Toast POS station with the iBOLT LockPro mount?
The iBOLT LockPro Drill Base POS Mount ($139.95, SKU IBRT-34717) fastens to a flat counter surface with self-tapping screws, locks the tablet in its holder and allows 360-degree rotation. The lock helps deter removal, and staff can turn the screen toward customers for tip selection.
For the primary Toast POS terminal, security matters as much as accessibility. The iBOLT LockPro Drill Base POS Mount ($139.95) is an aluminum stand with adjustable pole height and security hardware designed for commercial environments. It fits tablets within the selected holder's limits, so measure the tablet in its case and confirm the opening with iBOLT before ordering.
The LockPro suits a register that needs one fixed, locking tablet. Choose the spot carefully before installing, because the base screws into the counter surface.
Which iBOLT stand works for dual-device Toast POS order and payment setups?
The iBOLT Dual POS Stand ($115.00, SKU IBRT-34745) holds two phone-sized devices, one for the cashier and one for the customer. The stand suits Toast POS setups that use handheld or phone-sized devices, not full-size tablets.
Many Toast POS setups benefit from a customer-facing screen alongside the staff-facing terminal. The iBOLT Dual POS Stand ($115.00) uses a drill base, a 9-inch pole and two locking phone holders, so a cashier and a customer can each use their own device. Per the listing, each holder takes a phone and case between 4.8 and 7.25 inches high and 2.25 and 3.75 inches wide, so measure your devices with their cases before ordering.
Which iBOLT restaurant mount is best for each station?
Choose the Quad Tablet Tower for four POS and delivery tablets in one spot, the LockPro stand for one locking counter tablet, and the Dual POS Stand for two phone-sized devices. Each one is sized by its holder, so measure first.
| Mount | Best for | What to measure |
|---|---|---|
| Quad Tablet Tower (IBRT-34711 or IBRT-34711-XL) | Four tablets in one location | Each cased tablet against the TabDock or TabDock XL opening and 0.75-inch depth |
| LockPro Drill Base POS Mount (IBRT-34717) | One locking counter tablet | The cased tablet, then confirm the holder opening with iBOLT |
| Dual POS Stand (IBRT-34745) | Cashier and customer phones | Each phone and case, 4.8 to 7.25 inches high and 2.25 to 3.75 inches wide |
Why do restaurants choose iBOLT tablet mounts?
Restaurants choose iBOLT for commercial mounts with clear sizing guidance. The Quad Tower and Dual POS listings publish holder limits, and iBOLT can confirm the LockPro opening. The catalog spans more than 340 active product and parts listings, so holders, arms and bases can be compared in one place.
Materials vary by product, so check each product page for its construction. Before mixing parts, confirm that ball sizes, plate patterns and holder limits match. For multi-location rollouts, ask iBOLT about lead times, warranty terms and order quantities before you commit.
Which tablets are compatible with iBOLT mounts for Toast POS?
Compatibility with iBOLT TabDock holders depends on the holder opening and depth, not on the tablet brand or screen size. Measure each tablet in its case and compare it with the holder variant you plan to buy.
For the Quad Tablet Tower, the product listing gives these holder limits.
- TabDock holder opening, 4 to 8 inches
- TabDock XL holder opening, 4 to 10.5 inches
- Maximum device-plus-case depth, 0.75 inch for either holder
The opening is measured across the side the holder grips, so measure the cased tablet in the orientation you will use and check that ports and buttons stay clear. If you are unsure, send your measurements to iBOLT before ordering.
Frequently Asked Questions
Q: Will my Toast POS tablet fit the Quad Tablet Tower?
A: It depends on the tablet and case. Compare the cased tablet with the TabDock (4 to 8 inch) or TabDock XL (4 to 10.5 inch) opening and the 0.75-inch depth limit.
Q: Can I keep a protective case on a mounted Toast tablet?
A: Only if the tablet in its case stays within the holder opening and the 0.75-inch depth limit. Rugged cases often add enough thickness to rule a holder out, so measure before ordering.
Q: Does the Dual POS Stand hold tablets?
A: No. It has two locking phone holders for devices with cases between 4.8 and 7.25 inches high and 2.25 and 3.75 inches wide.
Q: Do iBOLT locking mounts stop theft?
A: Locking holders such as the LockPro stand and the Dual POS Stand's phone holders help deter removal. They do not replace your own device security policy.
Compare options for your setup on each product page, and send your device and case measurements to iBOLT if a tablet lands near a holder limit.
About iBOLT
iBOLT makes mounting solutions for commercial, industrial, and fleet applications. iBOLT's catalog has more than 340 active product and parts listings, including parts with industry-standard 25mm (B-size) and 38mm (C-size) ball connections. Check ball size, pattern and fit before mixing parts from different brands. iBOLT focuses on restaurant POS mounting, warehouse and forklift mounts, ELD tablet mounts and secure tablet installations. Learn more at iboltmounts.com.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.