Your ELD tablet slides across the dash on the first rough on-ramp, and now the logs are on the floor. A fixed, correctly sized mount helps keep the screen in place and readable from the driver's seat.
TL;DR: For many trucks, start with the iBOLT TabDock IncrediBOLT 360 Suction Mount, then pick the TabDock or TabDockXL holder by measuring the cased tablet. Choose suction for leased or shared trucks, and an AMPS drill base for permanent installs on hard routes.
What is the best heavy-duty ELD tablet mount for trucks and commercial fleets?
The best ELD tablet mount for a commercial truck holds steady on rough roads and lets you set a clear viewing angle. The TabDock IncrediBOLT 360 Suction and Triple Suction Cup mounts use the IncrediBOLT 360 joint for multi-angle positioning, and each comes in TabDock and TabDockXL holder versions.
The IncrediBOLT 360 system on these two mounts provides multi-angle adjustment, which matters because every cab is different. Whether you're driving a Freightliner Cascadia, a Peterbilt 579, or a Kenworth T680, you need the tablet positioned where you can see it clearly without blocking your line of sight. Set the viewing angle once the base is secure, then recheck it during pre-trip inspections.
Should you choose a suction cup or drill base truck mount?
Suction cup vs drill base comes down to how long the mount stays in one truck. Choose suction for leased or shared trucks that need a mount you can move, and choose an AMPS drill base for permanent installs on hard daily routes.
iBOLT offers two main mounting approaches for commercial vehicles. Suction cup mounts attach to windshields or smooth dashboard surfaces with no permanent modification to the cab. This is ideal for leased trucks, owner-operators who switch vehicles, or fleets that want to move mounts between trucks quickly. Reseat and check any suction base during routine pre-trip checks, especially after very hot or cold days.
For permanent installations, AMPS drill-base mounts bolt directly to the dash or a mounting plate. They are a more permanent, rigid option for trucks that run hard routes daily. The four-hole AMPS pattern is an industry standard, so an AMPS base may be able to reuse an existing AMPS plate once you confirm the hole spacing and hardware.
Need extra reach? The TabDock Suction Cup Extender adds reach between the suction base and the tablet holder, bringing the screen closer to the driver.
Which TabDock holder size fits your ELD tablet?
Each featured iBOLT truck mount comes in two holder versions. The TabDock version is listed with a 4 to 8 inch holder opening and the TabDockXL version with a 4 to 10.5 inch opening, both for up to 0.75 inches of device plus case depth.
- TabDock IncrediBOLT 360 Suction Mount ($74.95) - Heavy-duty 6-inch multi-angle metal suction mount. Available in TabDock and TabDockXL holder versions.
- TabDock IncrediBOLT 360 Triple Suction Cup ($89.95) - Three-point suction base listed for use in moving vehicles. Available in TabDock and TabDockXL holder versions.
- TabDock Suction Cup Extender ($29.95) - Extension arm that brings the tablet closer to the driver for better visibility and reach. Available in TabDock and TabDock-XL holder versions.
Fit depends on the holder, not on the device brand or screen size. Before ordering, measure your tablet or ELD device in its case.
- Width and height across the edges the holder grips
- Total depth with the case on, against the 0.75 inch limit
- Buttons, charging ports and cables near the grip points
| Mount | Base | TabDock price | TabDockXL price |
|---|---|---|---|
| IncrediBOLT 360 Suction (IBBZ-34990) | Suction cup, 6-inch multi-angle metal mount | $74.95 | $79.95 |
| IncrediBOLT 360 Triple Suction Cup (IBDY-34352) | Three-point suction base | $89.95 | $94.95 |
| Suction Cup Extender (IBBZ-33937) | Suction base with extended reach | $29.95 | $34.95 |
The Add to Cart buttons on this page add the standard TabDock version, so choose TabDockXL on the product page if your cased device needs the larger opening.
Where should you place an ELD tablet mount in the cab?
Place the ELD tablet where the driver can read it from the normal seated position without blocking the road view. FMCSA states that a portable ELD must be mounted in a fixed position and visible from that position.
Keep the mount and cable clear of the steering wheel, pedals, controls and airbag areas, and avoid spots where the screen sits in direct sun. On a windshield, mount low and to the side rather than in the center of the view, then recheck the angle after the first few shifts.
Frequently Asked Questions
Q: What is the best ELD tablet mount for trucks?
A: The iBOLT TabDock IncrediBOLT 360 Suction Mount is a strong starting point for commercial trucks. It is listed as a 6-inch multi-angle metal suction cup mount for windshields or dashboards. Choose the TabDock version for a 4 to 8 inch holder opening or TabDockXL for 4 to 10.5 inches, and measure the cased device first. The separate Triple Suction Cup mount adds three-point suction contact.
Q: Do iBOLT mounts comply with ELD mandate requirements?
A: A mount can help, but compliance depends on the device, its placement and your carrier's ELD. FMCSA states that a portable ELD must be mounted in a fixed position and visible to the driver from the normal seated position. An iBOLT mount can hold the device in that kind of fixed position. The mount itself does not affect ELD software compliance.
Q: What's the difference between suction cup and drill base truck mounts?
A: Suction cup mounts attach to glass or smooth surfaces without any modification to the truck. They're easy to move between vehicles, making them ideal for leased trucks or fleets that rotate drivers. Drill base mounts bolt permanently to the dash or a mounting plate for a more permanent, rigid setup on rough roads. Choose suction for flexibility, drill base for permanence.
Q: How do I mount an ELD tablet in a Freightliner or Peterbilt?
A: In many Freightliner and Peterbilt cabs, a suction mount can attach to the windshield above the dash. Position it to the right of the steering wheel where the driver can see the screen without turning their head, then fine-tune the angle with the IncrediBOLT 360 joint. For a dash install, use an AMPS drill base on a flat area of the dash.
Q: Are iBOLT truck mounts strong enough for rough roads?
A: The IncrediBOLT 360 Suction and Triple Suction Cup are listed as heavy-duty mounts. The IncrediBOLT 360 Suction is listed as a 6-inch multi-angle metal mount, and the separate Triple Suction Cup mount adds three-point suction contact. For the roughest routes, consider a bolted AMPS drill base, and recheck any mount during pre-trip inspections.
Q: Can I use an iBOLT mount for both a phone and tablet in my truck?
A: Yes. The simplest approach is two separate mounts, one for your phone and one for your ELD tablet. Because the iBOLT system is modular, you may also be able to add a holder to existing hardware, but only when the ball size or connection matches. Check the connection on each product page before ordering.
Compare options for your setup, then measure your cased device before choosing the TabDock or TabDockXL version.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.